|  | 
 
6 Per Pack
Epoxy-Tie SET epoxy is a two-component, low odor, 1:1 ratio, 100% solids epoxy-based adhesive for use as a high strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. SET meets the ASTM C-881 specification for Type I, II, IV and V, Grade 3, Class B and C.
Surfaces to receive epoxy must be clean. For installations in or through standing water, see Adhesive Anchors Application Guidelines for details. The base material temperature must be 40° F or above at the time of installation. For best results, material should be 70° - 80° F at the time of application. Cartridges should not be immersed in water to facilitate warming. To warm cold material, the cartridges should be stored in a warm, uniformly heated area or storage container for a sufficient time to allow epoxy to warm completely. Mixed material in nozzle can harden in 5-7 minutes at a temperature of 40° F or above.
Requires "Motor Freight" shipping.
Please select Motor Freight option at checkout and Loyola customer service will email or call you with shipping charges before charging your credit card. | Availability: Usually ships in 2-3 business days.
You can also call us at;
1-800-937-9021 x106 or
1-757-498-6118 x106 |
|
|
